Tektronix 560 user manual Go on to the setup instructions refer to the next

Installing Printer Software 3

Custom Installation

1.In the Driver Installation dialog box, select from the following options:

■Drivers/PPDs

(installs driver files and printer description files)

■QuarkXPress PDF

(installs an application-specific printer description file)

2.Click Next.

3.If you selected Drivers/PPDs in the previous window, the Custom Install: Select Drivers dialog box appears. Select one of the following drivers and click Next:

■Adobe Printer Driver for Windows 3.1

■Tektronix Printer Driver for Windows 3.1

Note: The Tektronix Printer Driver for Windows 3.1 must be installed in the Windows directory (default Destination Directory). Do not change the Destination Directory when installing the Tektronix driver unless you are installing the driver on a network and you know the location of the Windows directory on the network drive.

4.In the Custom Install: Select Utilities dialog box, select from the following options:

■Printer Utilities

(installs utility files for selecting printer features)

■Network Utilities

(installs utility files for using the printer on a network)

■Samplers

(installs color sampler charts and a fonts sampler)

Use the default Destination Directory or click Browse.

5.Click Next.

Files are copied to your hard disk.

6.If you are installing the Tektronix driver, select your printer type and click Next:

■Tektronix Phaser 560 Base version (printer’s standard configuration)

■Tektronix Phaser 560 Extended version (Extended Features option)

If you are not sure which version of the printer you have, check the printer’s startup page for Extended Features: Yes or No.

7.The Finish Installation dialog box contains instructions for completing the printer software setup; click Next.

8.In the Installation Completed dialog box, click Finish.

9.Go on to the setup instructions (refer to the next page).

User Manual 3-9