Getting Set Up 2

What happens at power-up

Both status indicators (power and error ) on the printer’s front panel light briefly. Messages appear in the Liquid Crystal Display panel (LCD). The printer goes through a series of self-tests. The printer takes about 3 minutes to warm up and complete the self-tests (depending on the amount of memory installed).

Exit

9008-43

After the self-tests run successfully, the printer prints a Startup Page and, if the printer’s copy count is between five and eight pages, prints a Registration Page. The Startup Page prints whenever you turn on or reset the printer.

Note You can disable the Startup Page using either the front panel menu (refer to page 8-10 for instructions) or a software utility file provided on the printer’s CD-ROM and the Tektronix World Wide Web site (refer to “Enabling and disabling the Startup Page” for details).

When the printer is ready for operation

When the power-up sequence is complete, the green indicator is on steady (not blinking), the amber indicator is off, and the front panel message reads Ready.

User Manual

2-21

Page 39
Image 39
Tektronix 560 user manual What happens at power-up, When the printer is ready for operation