Tektronix 560 Duplex printing, Making selections in the driver, Listed under Paper Source or Tray

4Printing Basics

Duplex printing

This printer allows you to print double-sided on laser paper, from the PAPER trays and the Multi-Purpose Feeder.

Caution Use laser bond paper for duplexing; two-sided printing on specialty media can shorten component life. For opacity and feed reliability, use laser paper that is at least 100 g/m2 (28 lb. bond). For best results, do not use heavy toner coverage on Side 1. Also, increase the top margin on Side 1 for better feed reliability.

Double-sided printing with a PAPER tray

SIDE 1

1. Place the paper in the PAPER tray with the side to be printed face down; the top of the page is under the paper tray’s hooks. This example shows letterhead paper.

5

2

1

PAPER

A4

32564-08

2.Insert the PAPER tray into the printer.

If you have a Lower Tray Assembly, you can use any of the printer’s media tray slots: Upper, Middle, or Lower; for these instructions, use Upper.

Note For a multi-page document, print odd-numbered pages for Side 1. (This selection is application-specific).

3.Select the tray and output order, using either (a) a supported driver or (b) the printer’s front panel; then send the print job:

■Making selections in the driver

Select the tray:	Upper	Listed under Paper Source or Tray
		Selection (depending on the driver).
Output Order:	Face Down Listed under Options or TekColor
		Options (depending on the driver).

■Making selections in the front panel

Select the tray	Upper	Listed under Default Tray in the
		Printer Defaults menu.
Output Order	Face Down	Listed under Output Order in the
		Printer Defaults menu.

4.Remove the printed paper from the output tray.

4-54Phaser 560 Color Laser Printer