Tektronix 560 user manual Installing printer software for Windows NT

3Installing Printer Software

Installing printer software for Windows NT 4.0

Note If you are installing from floppy diskettes, you may need more than one diskette depending on your Windows system. Keep all of the printer’s diskettes handy during the installation, and insert each diskette when you are prompted by the installation program.

1.Insert either the printer’s CD-ROM or the Windows Disk 1 into the appropriate drive on your computer.

2.Click the Start icon in the taskbar, and select Run.

3.Type in the drive for the CD-ROM or diskette, type SETUP.EXE, and click OK.

4.Click Next in the two introduction screens in the Installer.

5.In the Select Installation Type dialog box, select either Easy Installation or Custom Installation, and click Next.

Easy Installation	Custom Installation
The following files are copied to your	1. In the Driver Installation dialog box, select from the following
hard disk:	options:

■QuarkXPress PDF

(installs an application-specific printer description file)

■PhaserPrint Plug-in for Photoshop (installs an application-specificplug-in, if the application if found)

■Samplers

(installs color sampler charts and a fonts sampler)

■Drivers/PPDs

(installs driver files and printer description files)

■QuarkXPress PDF

(installs an application-specific printer description file)

■PhaserPrint Plug-in for Photoshop

(installs an application-specific plug-in, if the application if found)

2.Click Next.

3.In the Custom Install: Select Utilities dialog box, select from the following options:

■Printer Utilities

(installs utility files for selecting printer features)

■Network Utilities

(installs utility files for using the printer on a network)

■Samplers

(installs color sampler charts and a fonts sampler)

Use the default Destination Directory or click Browse.

4.Click Next.

5.Files are copied to your hard disk.

3-4 Phaser 560 Color Laser Printer