Tektronix 560 user manual Now face down

Printing Basics 4

SIDE 2

Caution When printing Side 2 for duplex printing (using the Multi-Purpose Manual Feed), always choose Paper 2nd Side as the media type. This selection is specially formulated for this purpose; choosing any other media type can reduce component life.

1.Place the paper in the Multi-Purpose

Feeder in this way:

■The blank side is face up (the side

that has already been printed is	1 2 3 4 5 6 7
now face down).

■ The top of the page enters the printer first.

32564-07

2.First, make these selections in the printer’s front panel:

Default Tray:	Multi-Purpose	Listed in the Printer Defaults menu.
Media Type:	Paper 2nd Side	Listed under Multi-Purpose Feeder in
		the Printer Defaults menu.

Note For a multi-page document, print even-numbered pages for Side 2. (This selection is application-specific).

3.Then, make this selection in a supported driver and send the print job:

Select the tray: Multi-Purpose	Listed under Paper Source or Tray
Tray*	Selection (depending on the driver).

4.Remove the printed paper from the output tray.

User Manual 4-57