Samsung SDE5003, SDE-500X To set the privacy region, When the camera setup is done, press OK

main menu

•Screen Setup : The video appeared on the screen may vary depending on the channel’s camera, configure the DVR display to your preferences.

Select a channel and adjust the <(Brightness)>,

< (Contrast)>, and < (Color)> of the selected channel.

Press the <Init> to initialize settings back to the default 50.

•Privacy Region : You can specify a certain area of the camera video to be protected for your privacy.

The <Privacy Region> is supported by SDE-4003/5003 only.

6.When the camera setup is done, press <OK>.

Screen Setup
CH1	50	50	50	Init	Apply to All CH
		OK		Cancel

To set the privacy region

Select <Privacy Region>.

When “Privacy Region” window appears, select a channel for detection and set the area of motion detection.

•To set the area in “Privacy Region” window

In the “Privacy Region” window, select desired region

from <>.

•Privacy Region

You can specify up to 4 privacy zones for each channel, which can be identified by the color.

Privacy Region

CH1

Privacy Region1

Individual Apply to All CH

OK Cancel

1 Purple 2 Green 3 Blue 4 Yellow

•To set the area using <Individual> selection

When selected <Individual>, “Privacy Region” window disappears and you can select cells one by one. When the motion area setup is done, Right-click to select <Menu> in the context menu or the [MENU] button on the remote control to display the “Privacy Region” window again.

-Clear All : Selected cell is removed from the Privacy Region.

-Menu : After selecting individual motion areas, move to the “Privacy Region” window.

If selected <Apply to All CH>, selected motion area is applied to all channels.

When completing the privacy zone settings, click <OK>.

Clear All

Menu

60_ main menu