Samsung SDE-400X Event Setting, Group Setting, Button to move to Mailing Service and press

Event Setting

You can set the interval and type of the event that will be sent to the user.

Using the mouse may help make setup easier.

SDE-4003 and SDE-5003 Model don’t support the function of Sensor detection.

1.	In the <Network> setting window, press the up/down			Mailing Service
	(	) button to move to <Mailing Service> and press the		SMTP	Event	Group	Recipient
2.	[ENTER] button.			 Event Interval	10 min
	Select <Event>.			Sensor	Motion
3.				 Use Event Transfer
	Use direction buttons (		) to move to a desired item	Power On/Off	Manual Record		Video Loss
	and set the value.			Change P/W	HDD Info
• Event Interval : Set the event interval.
	 If a series of events occurs, the e-mail will be sent at the specified
		interval, not on each event.			OK	Cancel

•Use Event Transfer : Select an event type to send if an event occurs.

If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.

4.When the event setting is done, press <OK>.

Group Setting

You can set the group to whom the e-mail is sent, and specify the permission for each group. You can add recipients for each group in the <Recipient> menu item.

The recipient is set separately from the DVR user group.

Using the mouse may help make setup easier.

SDE-4003 and SDE-5003 Model don’t support the function of Sensor detection.

 MAIN MENU

1.In the <Network> setting window, press the up/down

( ) button to move to <Mailing Service> and press the [ENTER] button.

2.Select <Group>.

3. Use direction buttons (	) to move to a desired item
and set the value.

•Add : Select <Add> and use the virtual keyboard to add a group.

 Refer to “Using Virtual Keyboard”. (Page 50)

Mailing Service

SMTP	Event		Group	Recipient
 Group			Add	Delete	Rename
 Recipient Permission
Sensor		Motion
Change P/W		HDD Info		Video Loss
Power On/Off		Manual Record
		OK	Cancel

•Delete : Deletes the selected group.

•Rename : You can reset the recipient permission of an existing group.

•Recipient Permission : Set the permission of the recipient group.

4.When the group setting is done, press <OK>.

English _87