Samsung SDE5003, SDE-500X, SDE-5003, SDE-400X Setting the Monitor, Setting Display position

main menu

Monitor

You can configure information to be displayed.

Setting the Monitor

Using the mouse may help make setup easier.

1.	Use the up/down buttons (	) in <Device> window to
2.	move to <Monitor>, and press [ENTER] button.
	Select <Monitor>.
3.	Use direction buttons (	) to move to a desired
	item, and set the value.

•Event Display : Sets the dwell time of the event channel display on the monitor when an event occurs.

If selected <Continuous>, it displays the channel until you press [ALARM] button to release it.

•Display : Displays only checked items on the monitor screen.

Monitor
Monitor	Spot Out	Mode
 Event Display	OFF
 Display	Date	Time	CH Name	Icon
 Multi CH SEQ Time	5sec
 Video Output	VGA
Display Position Setup
	OK	Cancel

•Multi CH SEQ Time : Sets the interval between automatic display switching in 4-split and 9-split mode of the Live screen.

•Video Out: You can set the video output mode.

-Auto : The default is set to Composite. (In VGA mode, the “SAMSUNG” logo will be displayed)

If a VGA source is connected, the source from the VGA will be displayed as main. (In Composite mode, the spot screen will be displayed)

The monitor distributor is not supported.

To switch to VGA mode, turn off the DVR set and connect the VGA jack. (The VGA monitor will turn on)

-VGA : The main video mode will switch to VGA after the DVR set reboots; the composite source will be displayed on the spot screen.

-Composite : The main video mode will switch to Composite after the DVR set reboots.

(SDE-4003/5003 : In VGA mode, the “SAMSUNG” logo will be displayed.)

4.When the monitor setup is done, press <OK>.

Setting Display position

Some monitors many not display information (camera name, icon, time information, etc.) about the DVR, depending on the condition. Then, you can change the display position of the data.

1.In the <Device> window, press the up/down ( ) button to move to <Monitor> and press the [ENTER] button.

2.Select the <Monitor> item.

3.Select <Display Position Setup> in the bottom.

You will move to the <Display Position Setup> window.

4.Use the four direction buttons or the number buttons on the front panel or the remote control to adjust the data position.

2012-01-01 01:10:25
Display Position Setup
	30
30	30
	30
OK	Cancel

64_ main menu