Samsung SDE5003, SDE-500X REC Quality & Resolution, Setting Standard Recording Properties

main menu

REC Quality & Resolution

You can set resolution, FPS and quality of recordings by channel, and by recording type of standard / event.

Setting Standard Recording Properties

You can set each channel’s resolution, quality and fps for normal recordings.

Using the mouse may help make setup easier.

1. Use the up/down buttons ( ) in <Record> window to move to <REC Quality & Resolution>, and press [ENTER] button.

2.Select <Standard>.

3.When the recording setup is done, press <OK>.

REC Quality & Resolution

Standard	Event
Remaining count : 4CIF(L) : 8			2CIF(M) : 16			CIF(S) : 32
CH	Resolution 			Record Rate 		Record Quality 
1	CIF(S)			7fps		Level4	
2	CIF(S)			7fps		Level4	
3	CIF(S)			7fps		Level4	
4	CIF(S)			7fps		Level4	
5	CIF(S)			7fps		Level4	
6	CIF(S)			7fps		Level4	
7	CIF(S)			7fps		Level4	
8	CIF(S)			7fps		Level4	
						Previous/Next Page
			OK	Cancel

Setting Event Recording Properties

You can set each channel’s resolution, quality and fps for event recordings.

Using the mouse may help make setup easier.

1. Use the up/down buttons ( ) in <Record> window to move to <REC Quality & Resolution>, and press [ENTER] button.

2.Select <Event>.

Event recording setup window appears.

3. Use direction buttons (	) to move to a desired
item, and select it.

•Resolution : Sets the resolution of the recorded screen.

•Record Rate : Frames recorded per second.

•Record Quality : Sets the recording quality.

REC Quality & Resolution

Standard	Event
Remaining count : 4CIF(L) : 8		2CIF(M) : 16			CIF(S) : 32
CH	Resolution 		Record Rate 		Record Quality 
1	4CIF(L)		7fps		Level4	
2	4CIF(L)		7fps		Level4	
3	4CIF(L)		7fps		Level4	
4	4CIF(L)		7fps		Level4	
5	4CIF(L)		7fps		Level4	
6	4CIF(L)		7fps		Level4	
7	4CIF(L)		7fps		Level4	
8	4CIF(L)		7fps		Level4	
					Previous/Next Page
		OK	Cancel

M The estimated total remaining count means the total number of remaining recordings for both standard and event recordings.

You cannot increase the remaining count if the current remaining count has reached zero or there is no available remaining count from any other page. If this is the case, reduce the remaining count for the current page, or do so for the same channel on any other page.

4.When the Event recording setup is done, press <OK>.

68_ main menu