Samsung SDE5003, SDE-500X Spot OUT, Zoom, Selecting a Spot Out mode, Multichannel Live Menu

live

SPOT OUT

The Spot Out monitoring is independent of the Live mode, which monitors a specific channel through the Spot Out port.

Selecting a Spot Out mode

If an event occurs such as sensor, motion or alarm from the Spot Out port in connection with a monitor, you can select a output screen mode.

1.In Live mode, right-click any area on the screen. The Live menu appears.

2.Click Spot Out.

Supports the Spot output in Single screen with Auto Sequence mode.

The Spot output is supported only for a designated channel. For the Spot Out port of a model, refer to “Part Names and Functions (Rear)”. (Page 19)

Scene Mode  2012-01-01 01:10:25

Spot Out		Auto Sequence
Audio Off
		CH1
Freeze		CH2
Stop Alarm		CH3
Record		CH4
		CH5
Play
		CH6
Search
		CH7
Backup		CH8
Main Menu		CH9
Shutdown		CH10
		CH11
Hide Launcher
		CH12
Logout
		CH13
		CH14
		CH15
		CH16

< Multichannel Live Menu >

ZOOM

This is available only in Single Live mode. In Single mode, select a desired area and use the Zoom function to enlarge it twice.

1.Select <Zoom In> in the right-click menu.

Press the [ZOOM] button on the remote control, or simply click < > in the launcher menu. The zoom box appears.

2.Use the direction keys, or drag and drop to specify an area to enlarge.

3.Press the [ENTER] button, or double-click the selected area to enlarge it twice.

 In the enlarged image, use the direction buttons (	) on the remote control or the front panel to move the
enlarged area.

4.Press the [ZOOM] button on the remote control, or simply click < > in the launcher menu to release the zoom.

2012-01-01 01:10:25

44_ live