Samsung SDE-500X, SDE5003, SDE-5003, SDE-400X user manual Alarm Schedule, Apply to All Alarm

Alarm Schedule

You can set the conditions and operating hours for scheduled alarms.

Using the mouse may help make setup easier.

1. Use the up/down buttons ( ) in <Event> window to move to <Alarm Schedule>, and press [ENTER] button.

2.A window of <Alarm Schedule> settings appears.

• Alarm : Sets the alarm output method.

For further information on alarm output, refer to “HDD Alarm > Alarm”. (Page 63)

•<ON> : Marked in orange, and always generates alarm on scheduled time.

•<OFF> : Marked in white, no alarm is generated even if an event occurs.

•Event Sync : Marked in Blue, generates alarm only when an event occurs.

•Apply to All Alarm : Applies the configured schedule to all alarms.

 It is not supported by SDE-4003/5003.

M When the alarm is generated on the scheduled time, you can stop the alarm by canceling the schedule.

3.When the Alarm Schedule setup is done, press <OK>.

Alarm Schedule				
Alarm1				MAIN
All	00 01 02 03 04	05 06 07 08 09 10	11 12 13 14 15 16 17 18 19 20 21 22 23
Sun
Mon
				MENU
Tue
Wed
Thu
Fri
Sat
Hol
OFF	ON	Event Sync	Apply to All Alarm
		OK	Cancel

Alarm Schedule

Alarm1

All	00	01	02	03	04	05	06	07	08	09	10	11	12	13	14	15	16	17	18	19	20	21	22	23
Sun
Mon		Apply to All Alarm
Tue
Wed							Apply the alarm scheduling to all?
Thu
Fri									OK				Cancel
Sat
Hol
OFF			ON			Event Sync												Apply to All Alarm

OK Cancel

English _73