Samsung SDE-400X, SDE5003 Motion Detection, Window of motion detection area setup appears

•Alarm : Sets the alarm output method.

For further information on alarm output, refer to “HDD Alarm > Alarm”. (Page 63)

•Duration : Sets the duration of alarm signal and alarm sound.

5.When the sensor detection setup is done, press <OK>.

Sensor Detection
Sensor	Sensor Operation 		Cam 	Alarm 	Duration 
1	OFF		1	None	10 sec	
2	OFF		2	None	10 sec	
3	Alarm Setup					
4	OFF		4	None	10 sec	
		1		BEEP	All
			OK	Cancel		
						MAIN
			OK	Cancel		MENU

Motion Detection

You can set target detection region and motion, as well as the alarm signal output. When the motion detection region is set, it detects motion within the area.

Using the mouse may help make setup easier.

1.	Use the up/down buttons (	) in <Event> window to
	move to <Motion Detection>, and press [ENTER] button.
2.	A window of motion detection area setup appears.
	Use direction buttons (	) to move to a desired
	item, and set the value.

•Mode : Sets whether to activate motion detection.

•Sensitivity : Sets the sensitivity level of the motion detection.

•Alarm : Sets the alarm output method.

For further information on alarm output, refer to “HDD Alarm > Alarm”. (Page 63)

Motion Detection

CH	Mode 		Sensitivity 	Alarm 	Alarm Duration 
1	OFF		Level10[High] 	None	10 sec	
2	OFF		Level10[High] 	None	10 sec	
3	OFF		Level10[High] 	None	10 sec	
4	OFF		Level10[High] 	None	10 sec	
5	OFF		Level10[High] 	None	10 sec	
6	OFF		Level10[High] 	None	10 sec	
7	OFF		Level10[High] 	None	10 sec	
8	OFF		Level10[High] 	None	10 sec	
					Previous/Next Page
					Motion Region
			OK	Cancel

•Alarm Duration : Sets the duration of alarm signal and alarm sound.

3.When the motion detection setup is done, press <OK>.

English _71