Samsung SDE-400X, SDE5003, SDE-500X, SDE-5003 user manual Remote Devices, HDD Alarm

HDD Alarm

You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port, and its duration.

Using the mouse may help make setup easier.

1.	Use the up/down buttons (	) in <Device> window to	Storage Device
	move to <Storage Device>, and press [ENTER] button.
				Device		Format		HDD Alarm
2.	Select <HDD Alarm>.
							1		BEEP
					Check Alarm Output Port		All
	A window for setting HDD check and replace output ports			 Duration
							OFF
	and their durations appears.
3.				 Replace Alarm Output Port			1		BEEP
	Use direction buttons (	) to move to the desired					All
				 Duration
							OFF
	item.
• Alarm
							OK	Cancel

-Alarm signal will output through the alarm out port on the rear side when selected <1>.

-If <BEEP> was selected, a beep will sound.

-If <All> was selected, both beep sound and alarm signal through rear side ports will output.

 Alarm function is not supported by SDE-4003/5003.

•Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarm output port.

•Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specified alarm output port.

•Duration : Sets the alarm duration for the alarm signal and beep sound.

M <Check> status means that the HDD is operating but it has problems that require technical examination.

( ) appears on the Live screen.

<Replace> status means that the HDD has defect and requires immediate replacement.

( ) appears on the Live screen.

4.When the HDD Alarm setup is done, press <OK>.

Remote Devices

 MAIN MENU

You can set the Remote Control ID with the DVR.

Using the mouse may help make setup easier.

1.	Use the up/down buttons (	) in <Device> window to
2.	move to <Remote Device>, and press [ENTER] button.
	Use direction buttons (	) to move to the desired
	item, and press [ENTER] button.

3.Make sure to match IDs of the DVR and Remote Control, and press <OK>.

M For changing the remote control’s ID, refer to “Changing the Remote Control ID”. (Page 22)

Remote Device

Remote Control ON ID 0

OK Cancel

English _63