Programming
*8 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. The setting should stay at “700 ms” unless pressing MFLASHN fails to pick up the waiting call.
*9 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to “A” if telephone line condition is not good.
Alarm
An alarm sounds at the set time for 3 minutes once or daily. Alarm can be set for each handset.
Important:
RMake sure the unit’s date and time setting is correct (page 13).
1MMENUN#720
2MbN: Select the desired alarm option. a
MSELECTN
“Off” |
| Turns alarm off. Go to step 7. | |
|
|
|
|
“Once” |
| An alarm sounds once at the | |
|
| set time. | |
|
|
|
|
“Daily” |
| An alarm sounds daily at the | |
|
| set time. Go to step 4. | |
|
|
|
|
3Enter the desired month and date. a
MOKN
4Set the desired time.
5*: Select “AM” or “PM”. a MOKN
6MbN: Select the desired alarm tone. a
MSELECTN
R We recommend selecting a different ringer tone from the one used for outside calls.
7MSELECTN a MOFFN
Note:
RTo stop the alarm, press MOFFN or place the handset on the base unit or charger.
RWhen the handset is in use, the alarm will not sound until the handset is in standby mode.
Silent mode
Silent mode allows you to select a period of time during which the handset and/or base unit will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each unit.
Important:
RMake sure the unit’s date and time setting is correct (page 13).
RWe recommend turning the base unit ringer off (page 15) in addition to turning the silent mode on.
RIf you have set the alarm, the alarm sounds even if the silent mode is turned on.
Turning silent mode on/off
1MMENUN#238
2MbN: Select the desired setting. a
MSAVEN
R If you select “Off”, press MOFFN to exit.
3Enter the desired hour and minute you wish to start this feature.
4*: Select “AM” or “PM”. a MOKN
5Enter the desired hour and minute you wish to end this feature.
6*: Select “AM” or “PM”.
7 MSAVEN a MOFFN
Changing the start and end time
1MMENUN#237
2Continue from step 3 “Turning silent mode on/off”, page 25.
For assistance, please visit http://www.panasonic.com/help | 25 |
