Panasonic KX-TGD210 Editing a caller’s phone number, Caller ID number auto edit feature

Caller ID Service

Note:

RIf the entry has already been viewed or answered, “ ” is displayed.

Editing a caller’s phone number

You can edit a phone number in the caller list by removing its area code and/or the long distance code “1”.

1MCN CID

2MbN: Select the desired entry.

3MMENUN a MbN: “Edit” a MSELECTN

4Press MEDITN repeatedly until the phone number is shown in the desired format.

5MN

Note:

RThe number edited in step 4 will not be saved in the caller list.

Caller ID number auto edit feature

Once you call back an edited number, the unit which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the unit as follows:

–When the call is being received, the Caller ID number is displayed in the same format as the edited number.

–After the call has ended, the caller’s phone number is displayed in the same format as the edited number, when reviewed from the caller list.

For example, you can use this feature to set the unit to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code.

To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that caller’s area code are edited automatically.

This feature can be set for each unit (page 23). The default setting is “On”.

Note:

RPhone numbers from the 4 most recently edited area codes are automatically edited.

Erasing selected caller information

1MCN CID

2MbN: Select the desired entry.

3MERASEN a MbN: “Yes” a MSELECTN a MOFFN

Erasing all caller information

1MCN CID

2MERASEN a MbN: “Yes” a MSELECTN a MOFFN

For assistance, please visit http://www.panasonic.com/help 29