Panasonic KX-TGD223 Other programming, Registering a unit, Changing the handset name, Programming

Programming

without phone number feature is turned on. To turn the feature off: MERASEN a MCN a MSAVEN a MOFFN

Other programming

Changing the handset name

Each handset can be given a customized name (“Bob”, “Kitchen”, etc.). This is useful when you make intercom calls between handsets. You can also select whether or not the handset name is displayed in standby mode. The default setting is “No”. If you select “Yes” without entering any handset name,

“Handset 1” to “Handset 6” is displayed.

1MMENUN#104

2Enter the desired name (max. 10 characters; page 18).

3MSAVEN

4MbN: Select the desired setting. a MSELECTN 2 times a MOFFN

Registering a unit

Operating additional units

Additional handsets

Up to 6 handsets can be registered to the base unit.

Important:

RSee page 5 for information on the available model.

Registering a handset to the base unit

The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset.

1Handset:

MMENUN#130

2Base unit:

Press and hold MLOCATORN for about 5 seconds.

R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step.

3Handset:

Press MOKN, then wait until a long beep sounds.

Deregistering a handset

A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system.

1MMENUN#131

R All handsets registered to the base unit are displayed.

2MbN: Select the handset you want to cancel. a MSELECTN

3MbN: “Yes” a MSELECTN a MOFFN

For assistance, please visit http://www.panasonic.com/help 27