Panasonic KX-TGD225, KX-TG444SK, KX-TGD220, KX-TG443SK Call block, Storing unwanted callers

Programming

Call block

This feature allows the unit to reject calls when:

–the unit receives a call from a phone number stored in the call block list as unwanted (“Storing unwanted callers”, page 26).

–the unit receives a call without phone number (“Blocking incoming calls that have no phone number”, page 26).

When a call is received, the unit rings briefly*1 while caller information is being received. If the caller’s phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call. (Caller ID subscribers only)

*1 This is called first ring. If you do not want the first ring to sound, turn this setting to “Off” (page 26).

Important:

RRejected calls are logged in the caller list.

Storing unwanted callers

You can store up to 60 phone numbers in the call block list.

Important:

RWe recommend storing 10 digits (including the area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked.

n From the caller list:

1MCN CID

2MbN: Select the entry to be blocked.

R To edit the number: MMENUN a MbN: “Edit” a MSELECTN

Press MEDITN repeatedly until the phone number is shown in the 10-digit format. And then, press MSAVEN. Go to step 5.

3MMENUN

4MbN: “Save CID” a MSELECTN

5 MbN: “Call block” a MSELECTN

6 MbN: “Yes” a MSELECTN

7Edit the phone number if necessary (24 digits max.).

8MSAVEN a MOFFN

n By entering phone numbers:

1MMENUN#217

2MMENUN a MbN: “Add” a MSELECTN

3Enter the phone number (24 digits max.). R To erase a digit, press MCLEARN.

4MSAVEN a MOFFN

Blocking incoming calls that have no phone number

You can reject calls when no phone number is provided, such as private callers or out of area calls.

1MMENUN#240

2MbN: Select the desired setting. a MSAVEN a MOFFN

Setting the first ring for the call block list

If you do not want the first ring from a number on the call block list to sound, turn the first ring setting to “Off”. The default setting is “On”.

1MMENUN#173

2MbN: Select the desired setting. a MSAVEN a MOFFN

Viewing/editing/erasing call block numbers

1MMENUN#217

2MbN: Select the desired entry. R To exit, press MOFFN.

3To edit a number:

MEDITN a Edit the phone number. a MSAVEN a MOFFN

To erase a number:

MERASEN a MbN: “Yes” a MSELECTN a MOFFN

Note:

RWhen editing, press the desired dial key to add, MCLEARN to erase.

RWhen viewing, “Block w/o num” is displayed if the blocking incoming calls

26For assistance, please visit http://www.panasonic.com/help