3 Using the Product

3-1 Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

To return to the previous step, press the Red button.

1.Press the [POWER] button on the remote control.

• You can also use the [] button on the TV.

•The message <Select the OSD Language>. is displayed.

2.Press the [ ] button. Select the appropriate language by pressing the ▲ or ▼ button. Press the [] button to confirm your choice.

3.Press the ◄ or ► button to select <Store Demo> or <Home Use>, then the [] button.

• We recommend setting the TV to <Home Use> mode for the best picture in your home environment.

•<Store Demo> mode is only intended for use in retail environments. If the unit is accidentally set to <Store Demo> mode and you want to return to <Home Use> (Standard): Press the volume button on the TV. When the volume OSD is displayed, press and hold the [MENU] button on the TV for 5 seconds.

4.Press the [] button.

Select the appropriate country by pressing the ▲ or ▼ button. Press the [] button to confirm your choice

5.Press the [] button.

Press the ▲ or ▼ button to select <Air> or <Cable>, then press the [] button.

• <Air> : <Air> antenna signal.

•<Cable> : <Cable> antenna signal.

6.Press the ▲ or ▼ button to select the channel source to memorise. Press the ▼ button to select <Search>, then press the [] button.

•When setting the antenna source to <Cable>, a step appears allowing you to set a value for the digital channel search. For more information, refer to <Channel> → <Auto Store>.

•<Digital & Analogue>: Digital and Analogue channels.

•<Digital>: Digital channels.

•<Analogue>: Analogue channels.

•The channel search will start and end automatically.

• Press the [ ] button at any time to interrupt the memorisation process.

•After all the available channels are stored, the message <Set the Clock Mode> is displayed.

7.Press the [] button.

Press the ▲ or ▼ button to select <Auto>, then Press the [] button.

• If you select <Manual>, <Set current date and time> is displayed.

3-1

Using the Product