JVC HR-VP782U manual Select input mode on this VCR, Access Main Menu screen on this VCR

EN 45

You can use a camcorder as the playback VCR and your VCR as the recording VCR

1 Make connections

Connect an audio/video cable between the camcorder’s audio/video output connectors and your VCR’s video audio/video input connectors.

When the JVC camcorder is equipped with the Master Edit Control, you can control the VCR from the camcorder. Connect the mini-plug cable (not supplied with this VCR) as illustrated to the left.

When using a camcorder with a monaural output, connect the audio output connector on the camcorder to the left audio input connector on this VCR.

2 Load a cassette

Insert the cassette to be recorded on into this VCR (for recording).

3 Select input mode on this VCR

Select “L-1” — when connecting the camcorder to the audio/video input connectors on the rear panel.

Select “F-1” — when connecting the camcorder to the audio/video input connectors on the front panel.

On the front panel:

Press CH5°.

On the Remote:

Press the Number key "0 (AUX)" or CH +/–.

4 Access Main Menu screen on this VCR

Press MENU.

5 Access Function Set screen

On the front panel:

Press CH5° to move the highlight bar (arrow) to “FUNCTION SET”, then press OK.

On the Remote:

Press SHUTTLE PLUS %Þ to move the highlight bar (arrow) to “FUNCTION SET”, then press OK or SHUTTLE PLUS #.

6Select “EDIT” for Picture Control

Follow the procedure described on pages 38 and 39.

If your camcorder is a JVC Master Edit Control- equipped type — go to step 7.

If your camcorder is NOT a JVC Master Edit Control-equipped type — go to step 8.

7Enable remote pause function

On the front panel:		FUNCTION
Press CH5° to move		=PICTURE CONTROL	ON
		PICTURE CONTROL	AUTO
the highlight bar (arrow)		AUTO TIMER	OFF
to “AV COMPU-LINK”,		SUPERIMPOSE	ON
		AUTO SP=EP TIMER	OFF
then press OK to set it to		VIDEO STABILIZER	OFF
		NEXT PAGE
“OFF”.
	SELECT WITH (5,°) AND (OK)
On the Remote:	PRESS (MENU) TO END
Press SHUTTLE PLUS
%Þ to move the		PREVIOUS PAGE
highlight bar (arrow) to
		BLUE BACK	ON
“AV COMPU-LINK”,		2ND AUDIO RECORD	OFF
then press OK or		AUDIO MONITOR	HI-FI
		=AV COMPU-LINK	OFF
SHUTTLE PLUS # to set
it to “OFF”.
	SELECT WITH (5,°) AND (OK)
The REMOTE PAUSE/
	PRESS (MENU) TO END
AV COMPU-LINK
connector works as the AV Compulink

connector when “AV COMPU-LINK” is set to “ON” ; pg. 38 and 41), and works as the Remote Pause connector when “AV COMPU- LINK” is set to “OFF”.

8Return to normal screen

Press MENU.

9Start playback

Press PLAY ( 3 ) on the camcorder.

NOTE:

If the camcorder is equipped with a superimpose/OSD disable feature then set it to “OFF” before starting playback.

0Start recording

On the front panel:

Press REC ( ƒ ).

On the Remote:

Press REC ( ƒ ) and PLAY ( 3 ) at the same time.

If you are using a Master Edit Control-equipped JVC camcorder, recording starts automatically on this VCR. (Refer to camcorder’s instruction manual.)

NOTE:

Be sure to select “AUTO” for “PICTURE CONTROL” (or “NORM” when “VIDEO CALIBRATION” is set to “OFF”) after you finish dubbing the tapes ( pg. 38 and 39).