Basic |
|
|
| 2 On the front panel: | EN 25 | |
|
|
|
| |||
Recording |
| Select recording channel | ||||
| a– Press CH + or |
| ||||
|
|
|
| Press CH5°. |
| |
|
|
|
| On the Remote: |
| |
Turn on the VCR and the TV, and select the VCR | or |
| ||||
b– Press the Number keys then ENTER. | ||||||
channel 3 or 4 (or AV mode) on the TV. |
| |||||
| (The channel changes after a few seconds | |||||
|
|
|
| |||
|
|
| SHUTTLE ring | whether you press ENTER or not.) | ||
|
|
|
|
| ||
POWER |
| PLAY ( 3 ) | 4 | If you connect the TV and the VCR only using | ||
| the RF connection, press TV/VCR on the Remote | |||||
|
|
|
| so that the VCR mode indicator lights on the front | ||
|
|
|
| display panel, to view the program to be recorded. | ||
|
|
| PLAY | Set tape speed |
| |
|
|
| REW | 3 Press SP/EP to set the recording speed. | ||
POWER |
|
|
| |||
|
|
|
| |||
MENU |
|
|
|
|
| |
VIDEO |
|
|
| Start recording |
| |
| SP EP |
|
|
| ||
OK | VCR | CH | STOP/EJECT PAUSE | 4 On the front panel: |
| |
|
|
| SP/EP |
| ||
|
| 23 |
| |||
|
| Press REC ( ƒ ). |
| |||
|
|
|
|
| ||
|
| STOP/EJECT | On the Remote: |
| ||
|
| While holding REC ( ƒ ), press PLAY ( 3 ). | ||||
|
|
| ( 7 / 0 ) | |||
|
|
| If “VIDEO CALIBRATION” is set to “ON” | |||
|
|
| PAUSE ( 8 ) | |||
|
|
|
| (default setting: | pg. 39), this VCR checks the | |
|
|
| POWER | tape condition for about seven seconds, then | ||
|
|
| starts recording. (This means that the first seven | |||
|
|
|
| seconds of the program will not be recorded. If | ||
1 | 2 | 3 |
| this is inconvenient for you, follow the steps | ||
| below: |
| ||||
|
| 2 |
| |||
4 | 5 | 6 | 1 Press REC ( ƒ ) and PAUSE ( 8 ) to start | |||
7 | 8 | 9 |
| Video Calibration. | ||
| 2 Then press PLAY ( 3 ) to start recording | |||||
|
|
|
| |||
| 0 | 4 | after Video Calibration is complete. | |||
|
|
| To pause recording |
| ||
|
|
|
|
| ||
|
|
|
| Press PAUSE ( 8). To resume recording, press PLAY ( 3 ). | ||
1
REW ( 1 )
4
3
FF ( ` )
PAUSE ( 8 )
2–b
STOP ( 7 )
To stop recording
Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.
To rewind the tape
Press REW ( 1 ) (or turn the SHUTTLE ring on the front panel to the left).
To
Press FF ( ` ) (or turn the SHUTTLE ring on the front panel to the right).
To eject the tape
This VCR can check the tape condition during recording (and playback), and realizes the best possible pictures.
Press STOP/EJECT ( 7 / 0 ) on the front panel when the tape is not running.
You can also eject the cassette with the VCR turned off.
1 Load a cassette
Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette.
To turn off the VCR
Press POWER.
