BASIC PLAYBACK AND RECORDING | EN 21 |
Basic
Playback
Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.
| 2 | SHUTTLE |
POWER | ring |
|
|
|
| REW |
|
|
POWER |
|
|
|
|
|
|
MENU |
|
|
|
|
|
|
VIDEO |
|
|
|
|
|
|
OK | SP | EP | CH |
|
|
|
| VCR | REC | STOP/EJECT | PAUSE | ||
|
|
|
| SP/EP |
|
|
STOP/EJECT
( 7 / 0 )
POWER
1 2 3
2
4 5 6
7 8 9
0 4
2
1
REW ( 1 ) 
FF ( ` )
STOP ( 7 )
This VCR can check the tape condition during playback (and recording), and realizes the best possible pictures.
1 Load a cassette
Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR.
Do not apply too much pressure when inserting.
The VCR turns on automatically.
The counter is automatically reset to “0:00:00”. If the cassette’s record safety tab has been removed, playback begins automatically.
2Start playback
Press PLAY ( 3 ).
Tape speed (SP or EP) is automatically detected. If “VIDEO CALIBRATION” is set to “ON” (default setting: pg. 39), “VIDEO CALIBRATION” appears on the screen, and this VCR checks the tape condition during automatic tracking.
To stop playback
Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.
To rewind the tape
Press REW ( 1 ) (or turn the SHUTTLE ring on the front panel to the left).
To
Press FF ( ` ) (or turn the SHUTTLE ring on the front panel to the right).
To eject the tape
Press STOP/EJECT ( 7 / 0 ) on the front panel when the tape is not running.
You can also eject the cassette with the VCR turned off.
To turn off the VCR
Press POWER.
INFORMATION
This VCR is equipped with SQPB
SQPB does not deliver Super VHS resolution.
Clean the video heads using a dry cleaning cassette —
•Rough, poor picture appears while a tape is played back.
•The picture is unclear or no picture appears.
•“USE CLEANING CASSETTE” appears on the screen (only with “SUPERIMPOSE” set to “ON”: pg. 39.)
