[QUICK POWER ON] | [OFF]/[ON] |
The unit is put into recording pause approx. 1 second when the unit is turned on with the
mode set to 
or 
.
≥Depending on the recording conditions, start time may be longer than 1 second.
≥In the Quick power on mode, the zoom magnification becomes 1k.
[QUICK START] | [OFF]/[ON] |
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥When in Quick start standby mode about 80% of the power used in Recording pause mode is being consumed, so the recording time will be reduced.
≥Start time will not be shortened if there is no SD card inserted.
≥Change the mode to 
or 
.
1Set [QUICK START] to [ON].
2 | Close the LCD monitor while the mode is set | | ||
| to | or | . |
|
The status indicator A flashes green and the unit goes |
| |||
into Quick start standby mode. |
| |||
3 | Open the LCD monitor. |
| ||
The status indicator A lights red and the unit is | | |||
put into recording pause.
≥Quick Start Standby Mode is canceled if jabout 5 minutes have elapsed
jmode is set to 
≥Depending on the recording conditions, time for Quick Start may be more than 0.6 seconds slower in Still Picture Recording Mode.
≥It may take some time for Automatic white balance to adjust.
≥In the Quick Start Mode, the zoom magnification becomes 1k.
≥If [ECONOMY] (l 41) is set to [5 MINUTES] and the unit automatically goes into Quick Start Standby Mode, close the LCD monitor and then open it again.
≥Turn the unit off using the power button.
42
VQT2W55
