Panasonic HDC-SDX1P operating instructions To disconnect USB cable safely, 111

∫To disconnect USB cable safely

1Double click the icon in task tray displayed on the PC.

≥ Depending on your PC’s settings, this icon may not be displayed.

2Select [USB Mass Storage Device] and click [Stop].

3Verify [MATSHITA HDC-SDX1/SD USB Device] is selected and click [OK].

∫Charging the battery by connecting it to different devices

When using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray disc recorder or Panasonic DVD recorder, the battery will charge.

≥When connecting this unit to a PC for the first time, make sure to connect this unit to the PC with this unit turned on.

≥Insert the USB cable securely all the way. It will not operate properly if it is not inserted all the way.

≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)

≥Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder.

≥During charging, the status indicator flashes. When charging is finished, the status indicator turns off.

≥You cannot charge when the status indicator flashes rapidly for approx. 1 minute, or when it does not light at all. Charge using the AC adaptor. (l 20)

≥It will take 2 or 3 times longer to charge compared to when using the AC adaptor.

≥Use the AC adapter to charge the large capacity battery (VW-VBK360; optional).

≥If the status indicator flashes at a particularly fast or slow rate, refer to page 131.

≥When this unit is connected to a PC, Blu-ray disc recorder or DVD recorder using a USB cable while the unit is turned on, power is also supplied from the connected equipment to this unit.

111

VQT2W55