To watch images on a regular TV (4:3) or when both sides of the images do not appear on

the screen

Change the menu setting to display the images correctly. (Check the TV setting.)

: [SETUP] # [TV ASPECT] # [4:3]

Example of images with a 16:9 aspect ratio on a regular TV (4:3)

[TV ASPECT] setting

[16:9]

 

[4:3]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If a wide-screen TV is connected, adjust the aspect setting on the TV. (Refer to the operating instructions of the TV for details.)

To display the on-screen information on the TV

When the menu setting is changed, the information displayed on the screen (operation icon and time code etc.) can be displayed/not displayed on the TV.

: [SETUP] # [EXT. DISPLAY] # desired setting

[OFF]:

Not displayed

[SIMPLE]*:

Information partially displayed

[DETAIL]:

All information displayed

*This setting is only available in Recording Mode.

When the AV multi cable is connected to this unit, the setup screen of the AV multi destination is displayed on the screen of this unit. Touch either [COMPONENT] or [AV OUT] in accordance with the terminal connecting to the TV. (l 92)

If the HDMI mini cable and AV multi cable are connected at the same time, output will be prioritized in order of the HDMI mini cable, AV multi cable.

When viewing images recorded using 0.3M (640k480) on a [16:9] TV, the images may be stretched horizontally. Adjust the aspect setting on the TV. (Refer to the operating instructions of the TV for details.)

Refer to the following support site for information about Panasonic TVs with an SD card slot for playing back your pictures.

http://panasonic.net/

For details on how to play back, please read the operating instructions for the TV.

91

VQT2W55

Page 91
Image 91
Panasonic HDC-SDX1P To display the on-screen information on the TV, Setup # EXT. Display # desired setting OFF, Simple