Samsung SDE-5003, SDE5003, SDE-500X, SDE-400X user manual Mailing Service, Smtp Setting

main menu

Mailing Service

You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.

M If an event occurs with a channel where the camera’s video is set to <OFF> or the remaining recording count is set to <OFF>, only the text notification will be sent to the applicable email address.

The e-mail receivers are not able to adjust the attached image quality.

SMTP Setting

Sets the SMTP mail server.

Using the mouse may help make setup easier.

1.	In the <Network> setting window, press the up/down
				Mailing Service
	(	) button to move to <Mailing Service> and press the
					SMTP	Event		Group		Recipient
	[ENTER] button.
					 ServerType	SMTP mail Server
2.	Select <SMTP>.				 Server
					 Port
								25
	You will see the SMTP setting window.
3.					Use Authentication
	Use direction buttons (		) to move to a desired item		User
					Password
	and set the value.
					 Secure Transfer
						Never
• ServerType : Displays the connected server type.					 Sender				ex. user@example.net
					TEST
•	Server : Enter a server to connect to.						OK	Cancel

•Port : Sets the communication port.

•Use Authentication : Check this if the SMTP server uses user authentication. The account input box will be activated.

•User : Enter a user to use authentication when connecting to the SMTP server.

•Password : Enter the password of the SMTP server user.

•Secure Transfer : Select one from <Never> and <TLS (if available)>.

•Sender : Use the virtual keyboard to enter the sender’s e-mail address.

 Refer to “Using Virtual Keyboard”. (Page 50)

•TEST : Conducts the test on the server settings.

4.When the SMTP setting is done, press <OK>.

86_ main menu