Samsung SDE-500X, SDE5003, SDE-5003, SDE-400X Setting the Spot Out, Setting the Screen Mode

Setting the Spot Out

You can set the DVR to output information / video apart from the monitor out.

Using the mouse may help make setup easier.

1. Use the up/down buttons ( ) in <Device> window to move to <Monitor>, and press [ENTER] button.

2.Select <Spot Out>.

The number of Spot Out terminals differs according to the model.

3. Use direction buttons (	) to move to a desired
item, and set the value.

Monitor				
Monitor	Spot Out	Mode
 Spot Out 1	SEQ	Set Mode	All	MAIN
 Event Display	OFF			MENU
	OK	Cancel

•Spot Out 1 : You can select between SEQ, and Single.

•Set Mode : A window for “Set Spot Out” appears and you can set the channel for it.

You can set the dwell time between the screen switching in “Setting the Device > Camera > SEQ-Dwell Time”. (Page 59)

M You can setup using the mouse right button in Live screen. Refer to “Spot Out”. (Page 44)

4.When the Spot Out is done, press <OK>.

Monitor

Monitor			Spot Out		Mode
 Spot	Set Spot Out
		1		2	3	4
		5		6	7	8
 Event Display		9	OFF	10	11	12
		13		14	15	16
					OK
				OK	Cancel

Setting the Screen Mode

You can configure the Live screen and Split Screens.

Using the mouse may help make setup easier.

1.	Use the up/down buttons (	) in <Device> window to
2.	move to <Monitor>, and press [ENTER] button.
	Select <Mode>.
3.	Use direction buttons (	) to move to a desired
	item, and set the value.

• Live Screen : Select split modes for the Live screen.

16-, 9-, and 4-split screens are included by default.

SDE-400X doesn't support 16-split screen mode.

Monitor

Monitor

Live Screen

Play Screen

Spot Out

Mode

LivePlay

• Play Screen : Select split modes for the playback screen.

Only the 13-split screen is optional.

Black shows the playback while white shows the Live screen.

4.When the screen mode setup is done, press <OK>.

OK Cancel

English _65