Samsung SDE-400X Setting the Device, Setting the Camera, Press Enter button, Select Camera

SETTING THE DEVICE

You can configure the settings of: Camera, Storage Device, Remote Device and Monitor.

Camera

Setting the Camera

You can set Video, Audio, Channel Name and Dwell Time of a Camera.

Using the mouse may help make setup easier.

 MAIN MENU

1.Press the [MENU] button on the remote control or front panel.

2.Use the left/right button (◄ ►) to select <Device>. Device setting menu is selected.

3. Use the up/down buttons (	) to move to <Camera>,
and press [ENTER] button.

Logout

Device

Camera

Storage Device

Remote Device

Monitor

Return

4.Select <Camera>.

You will see a window where you can configure the camera settings including Video, Audio, Channel Name, SEQ-Dwell Time and Privacy Region.

5. Use direction buttons (	) to move to a desired
item, and set the value.

•Video

-<ON/OFF> : You can turn ON/OFF the selected channel’s camera.

Camera

Camera
CH	Video 		Audio 		CH Name	SEQ-Dwell Time 
1	ON		OFF		CAM 01	5 sec	
2	ON		OFF		CAM 02	5 sec	
3	ON		OFF		CAM 03	5 sec	
4	ON		OFF		CAM 04	5 sec	
5	ON		OFF		CAM 05	5 sec	
6	ON		OFF		CAM 06	5 sec	
7	ON		OFF		CAM 07	5 sec	
8	ON		OFF		CAM 08	5 sec	
						Previous/Next Page
Screen Setup			Privacy Region
			OK		Cancel

-<Covert1> : Shows information other than the video of the selected channel.

For privacy protection, it does not display the video while the recording continues.

-<Covert2> : Shows nothing but an empty screen while the recording continues.

•Audio

-If set to <ON>, you can turn the audio of the channel ON on the Live screen.

-If set to <OFF>, the channel’s audio is off on the Live screen and not recorded.

•CH Name : Up to 15 characters including blanks are allowed.

 Refer to “Using Virtual Keyboard”. (Page 50)

•SEQ-Dwell Time : You can set the dwell time between channels for the Live screen.

 If set to <OFF>, the channel is not listed in the Auto Sequence mode.

English _59