Samsung SDE-5003 Connecting the Camera SEB-1020R, RJ-45 Cable Length 18.3m, 60ft, CVBS+ Cvbs GND

connecting with other device

RJ-45 Cable (Length: 18.3m, 60ft)

This cable is specific to UTP connection, which is not compliant with the LAN cable. You can use the UTP direct cable (all of 8 pins are used) to extend the length to a max of 200m. (based on UTP CAT 5e)

CVBS+

CVBS-

N.C

GND

Camera

			Name
		1	CVBS+
		2	CVBS-
	N.C	3	AUDIO
		4	GND
		5	12V
		6	N.C
N.C
		7	N.C
N.C
12V	<Cable pin information provided>	8	N.C

Cable

CONNECTING THE CAMERA (SEB-1020R)

Equipped with the IR LED and the illumination sensor, enables you to monitor at night as well as in daytime. The camera is suitable for both internal and external use.

Please make sure not to fully expose the camera to rain. The camera must be installed under a shelter to avoid exposure to excessive rain or moisture.

b c

Name	Description
IR LED	These infrared LED’s are controlled by the illumination sensor.
b Lens	Focal length of 3.6mm enables you to cover relatively longer range of monitoring.

cIllumination Sensor Detects incoming light to control the IR LED.

Camera Fitting	Groove that is used to fit the camera bracket.
Groove	There are two grooves; one on the top and one on the bottom.
BNC Cable	BNC terminal for video signal output.

Power Cable

Used to plug the power cable.

26_ connecting with other device