Brother NV1200 operation manual Attaching the Embroidery Foot, Attaching the embroidery foot

————————————————————————————————————————————————————

Attaching the Embroidery Foot

This section describes how to attach the embroidery foot.

Attaching the embroidery foot

Attach the embroidery foot when embroidering. Have the included embroidery foot “Q” and a screwdriver ready.

1

2

aEmbroidery foot bar

bCaught by the presser foot holder screw

CAUTION

●Always use the embroidery foot “Q” when embroidering. If the wrong presser foot is used, the needle may hit the presser foot and break or bend.

aPress (Needle position button) once or twice to raise the needle.

1

aNeedle position button

XThe needle goes up.

bTurn off the sewing machine.

CAUTION

●Before replacing the presser foot, be sure to turn off the sewing machine, otherwise

injuries may occur if (Start/stop button) is accidentally pressed and the machine starts sewing.

cRaise the presser foot lever.

	a
a Presser foot lever	4

XThe presser foot is raised.

•At the time of purchase, the presser foot lever is up.

dPress and hold the black button on the back of the presser foot holder to detach the presser foot.

a

b

aBlack button

bPresser foot holder

Attaching the Embroidery Foot 145