Brother NV1200 operation manual Automatically cutting the thread, CPress on the screen

SEWING BASICS ————————————————————————————————————————————

Automatically cutting the thread

The sewing machine can be set to automatically cut the threads at the end of the stitching. This is called “programmed thread-cutting”. If programmed thread- cutting is set, automatic reverse/reinforcement stitching is also set.

aTurn on the sewing machine.

XThe LCD comes on.

bSelect a stitch.

•For details on selecting a stitch, refer to “Selecting stitching” (page 49).

cPress on the screen.

XYou get , and the sewing machine is set for programmed thread-cutting and automatic reverse/reinforcement stitching.

•To turn programmed thread cutting off, press

.

dSet the fabric in place, and press (Start/ stop button) once.

1

aStart/stop button

XStitching starts after reverse stitching or reinforcement stitching.

eOnce you have reached the end of the

stitching, press (Reverse/reinforcement stitch button) once.

If stitching, such as buttonholes and bar tacking, that includes reinforcement stitching has been selected, this operation is unnecessary.

XAfter the reverse stitching or reinforcement stitching has been done, the sewing machine stops, and the thread is cut.

The thread is cut here.

Memo

zProgrammed thread-cutting will not be

performed if (Start/stop button) is

pressed while sewing. Press (Reverse/ reinforcement stitch button) at the end of the stitching.

zIf the power is turned off, programmed thread-cutting will be turned off.

60