Brother NV1200 operation manual Useful Functions, BSelect a stitch, CPress on the LCD

————————————————————————————————————————————————————

Useful Functions

Functions useful in improving sewing efficiency are described below.

Automatically sewing reverse/ reinforcement stitches

The sewing machine can be set to automatically sew reverse or reinforcement stitches at the beginning and end of the stitching. Whether reverse stitches or reinforcement stitches are sewn depends on the stitch that is selected. For details, refer to “Stitch Setting Chart” (page 68).

aTurn on the sewing machine.

XThe LCD comes on.

bSelect a stitch.

•For details on selecting a stitch, refer to “Selecting stitching” (page 49).

cPress on the LCD.

XIt turns to , and the sewing machine is set for automatic reverse/reinforcement stitching.

•To turn automatic reverse/reinforcement stitching off, press .

•When the sewing machine is turned off, the automatic reverse/reinforcement stitching setting is cancelled.

dPosition the fabric under the presser foot, and then press (Start/stop button) once.

2

1

aStart/stop button

XAfter reverse/reinforcement stitches are sewn, the machine starts sewing.

eAfter reaching the end of the stitching, press (Reverse/reinforcement stitch button) once. This step is not necessary if a stitch such as those for sewing buttonholes and bar tacks is selected where reinforcement stitches are automatically sewn.

1

aReverse/reinforcement stitch button

XAfter reverse/reinforcement stitches are sewn, the sewing machine stops.

Memo

zReverse/reinforcement stitches will not be

sewn if (Start/stop button) is pressed at the end of the stitching. Be sure to press (Reverse/reinforcement stitch button) at the end of the stitching.

Useful Functions 59