Brother NV1200 operation manual Embroidery pattern Mark

————————————————————————————————————————————————————

dTighten the adjustment screw by hand just enough to secure the fabric.

eGently remove the fabric from the frame without loosening the adjustment screw.

Memo

zThis precautionary step will help reduce pattern distortion while embroidering.

fPress the inner frame in from the top of the fabric again, lining up on the inner frame and on outer frame.

3

12

5 4

aOuter frame

bInner frame

cFabric (right side)

dStabilizer material

eLedge of outer frame

•Press down firmly until the inner frame is securely pressed against the ledge of the outer frame.

gTighten the adjustment screw while removing any slack in the fabric by hand. The goal is to have a drum-like sound when the stretched fabric is struck lightly.

■Using embroidery sheets

If the embroidery sheet attached to the embroidery frame is used, the embroidery can be sewn in exactly the right position on the fabric.

4

aMake a mark with a chalk pen at the center of the position for the pattern to be embroidered.

1

2

aEmbroidery pattern

bMark

Preparing the Fabric 153