Brother NV1200 operation manual Make sure that the thread passes under the pretension disk

————————————————————————————————————————————————————

Memo

zWhen sewing with fine, cross-wound thread, use the small spool cap, and leave a small space between the cap and the spool.

c b

a

aSpool cap (small)

bSpool (cross-wound thread)

cSpace

z When using thread that winds off quickly, such as transparent nylon thread or metallic thread, place the spool net over the spool before placing the spool of thread onto the spool pin.

If the spool net is too long, fold it to fit the size of the spool.

1 2

3

4

aSpool net

bSpool

cSpool cap

dSpool pin

hWhile holding the thread near the spool with your right hand, as shown, pull the thread with your left hand, and then pass the thread behind the thread guide cover and to the front.

iPass the thread under the thread guide plate, and then pull it to the right.

1

1

aThread guide plate

jPass the thread under the hook on the thread guide, and then wind it counterclockwise under the pretension disk.

1

1

aThread guide

Note

zMake sure that the thread passes under the pretension disk.

1

aThread guide cover

Winding/Installing the Bobbin 25