Brother NV1200 Attach zigzag foot J, Turn on the sewing machine and select a stitch, KPress

————————————————————————————————————————————————————

gThread the upper thread in the same way that the upper thread for the left side was threaded.

1

aThread guide cover

•For details, refer to steps h through j of “Threading the upper thread” (page 30).

hWithout passing the thread through the needle bar thread guide, manually thread the right needle.

Pass the thread through the eye of the needle from the front.

•The needle threader cannot be used with the twin needle. If the needle threader is used with the twin needle, the sewing machine may be damaged.

iAttach zigzag foot “J”.

•For details on changing the presser foot, refer to “Replacing the Presser Foot” (page 42).

CAUTION

●When using the twin needle, be sure to attach zigzag foot “J”. If bunched stitches occur, use presser foot “N” or attach stabilizer material.

jTurn on the sewing machine and select a stitch.

•For stitch selection see “Selecting stitching” (page 49).

•See “Stitch Setting Chart” (page 68) for

stitches that use a twin needle. 1

Note

zWhen using the pintuck foot (sold separately) to sew straight pintucks with the twin needle, select the stitch with the center needle position.

CAUTION

●When using the twin needle, be sure to select an appropriate stitch, otherwise the needle may break or the machine may be damaged.

kPress .

XThe screen for setting the twin needle appears.

lPress .

X displays in reverse highlight.

• If pressed again, it returns to .

The twin needle can now be used.

Upper Threading 35