Brother NV1200 Removing and attaching the presser foot holder, Remove the presser foot

GETTING READY ————————————————————————————————————————————

Removing and attaching the presser foot holder

Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that does not use the presser foot holder, such as the embroidery foot and quilting foot. Use the screwdriver to remove the presser foot holder.

aRemove the presser foot.

•For details, refer to “Replacing the presser foot” (page 42).

bUseholderthescrew.screwdriver to loosen the presser foot

b

a c

aScrewdriver

bPresser foot holder

cPresser foot holder screw

■Attaching the presser foot holder

aRaise the presser foot lever.

bAlign the presser foot holder with the lower- left side of the presser bar.

cHold the presser foot holder in place with your right hand, and then tighten the screw using the screwdriver in your left hand.

1

aScrewdriver

Note

zIf the presser foot holder is not correctly installed, the thread tension will be incorrect.

44