Brother NV1200 operation manual Changing the pattern size, Changing the stitch density

————————————————————————————————————————————————————

Changing the pattern size

The size of character stitches in the Gothic font and outline style, decorative stitches, and decorative satin stitches can be switched between large and small. However, the size of other patterns cannot be changed.

aSelect a stitch.

•For details on selecting a stitch, refer to “Selecting stitching” (page 75).

bPress until the desired size is selected.

cRepeat steps a and b.

Memo

zThe large pattern size is the default. If the small pattern size is selected, small patterns can be combined and connected.

zIf multiple patterns have been combined, the size of each selected pattern can be specified.

Changing the stitch density

If a decorative satin stitch has been selected, the stitch density can be changed.

aPress (Utility stitch key) on the operation

panel, and select (Decorative satin stitch).

3

bSelect a decorative satin stitch pattern.

cPressselected. until the desired stitch density is

Select for coarser stitching, or select for finer stitching.

CAUTION

●If the stitching density is too fine, depending on the needle, the stitches may be bunched together, causing the needle to break.

Sewing the Various Built-in Decorative Patterns 127