Brother NV1200 Winding/Installing the Bobbin, Bobbin precautions, Winding the bobbin

————————————————————————————————————————————————————

Winding/Installing the Bobbin

This section describes how to wind the thread onto the bobbin, and then insert the bobbin thread.

Bobbin precautions

Be sure to observe the following precautions concerning the bobbin.

CAUTION

●Only use the Bobbin (part code: SFB: XA5539-151) designed specifically for this sewing machine. Use of any other bobbin may result in injuries or damage to the machine.

●The included bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the included bobbin or bobbins of the same type (part code: SA156, SFB: XA5539-151).

Actual size

11.5 mm (7/16 inch)

This model Other model

1

Winding the bobbin

Wind the thread around the bobbin to prepare the bobbin thread.

aTurn on the sewing machine.

bOpen the top cover.

cPlace the bobbin on the bobbin winder shaft so that the spring on the shaft fits into the notch in the bobbin.

Press down on the bobbin until it snaps into place.

1

2

aNotch

bBobbin winder shaft spring

dSlide the bobbin winder in the direction of the arrow until it snaps into place.

• (Start/stop button) lights up in orange.

Winding/Installing the Bobbin 23