Brother NV1200 operation manual Pass the thread behind the needle bar thread Kguide

————————————————————————————————————————————————————

iPass the thread under the thread guide plate, and then pull it up.

1

aThread guide plate

jWhile using your right hand to lightly hold the thread passed under the thread guide plate, pass the thread through the guides in the order shown below.

1

aShutter

Note

zIf the presser foot has been lowered and the shutter is closed, the machine cannot be threaded. Be sure to raise the presser foot and open the shutter before threading the machine. In addition, before removing the upper thread, be sure to raise the presser foot and open the shutter.

zThis machine is equipped with a window that allows you to check the position of the take-up lever. Look through this window and check that the thread is correctly fed through the take-up lever.

Pass the thread behind the needle bar thread
kguide.
The thread can easily be passed behind the
needle bar thread guide by holding the thread
in your left hand, then feeding the thread with	1
your right hand, as shown.

1

aNeedle bar thread guide

Upper Threading 31