Brother NV1200 operation manual Place the spool of thread for the bobbin onto

GETTING READY ————————————————————————————————————————————

Remove the spool cap that is inserted onto the	Slide the spool cap onto the spool pin.
espool pin.	gSlide the spool cap as far as possible to the right, as
	shown, with the rounded side on the left.

1

2
a Spool pin	CAUTION
b Spool cap	● If the spool or the spool cap is not
Place the spool of thread for the bobbin onto	installed correctly, the thread may
fthe spool pin.	become tangled around the spool pin,
Slide the spool onto the pin so that the spool is	causing the needle to break.
horizontal and the thread unwinds to the front at the	● Three spool cap sizes are available,
bottom.
	allowing you to choose a spool cap that
	best fits the size of spool being used. If the
	spool cap is too small for the spool being
	used, the thread may catch on the slit in
	the spool or the needle may break.

• If the spool is not positioned so that the thread unwinds correctly, the thread may become tangled around the spool pin.

24