Brother NV1200 operation manual 166, DLower the presser foot lever, EPress Start/stop button

EMBROIDERY —————————————————————————————————————————————

dLower the presser foot lever.

1

aPresser foot lever

ePress (Start/stop button).

1

aStart/stop button

After progressing 5-6 stitches, press	(Start/
fstop button) to stop the machine.

gUse scissors to cut the thread at the beginning of the stitching.

Cut the thread at the edge of the stitching.

hPress (Start/stop button) again.

XThe embroidery begins again.

XStitching stops automatically with reinforcement after one color has been completed. When automatic thread cutting is set, the thread is cut.

iSet up embroidery thread for the next color, and repeat steps a through h.

jCut the excess thread.

XWhen the last color is sewn, “Finished sewing.” will appear on the display. Press

, and the display will return to the initial screen.

Memo

zFor the automatic cutting setting, refer to “LCD (liquid crystal display) operation” (page 158).

•If the thread is left at the beginning of the stitching, it may be sewn over as you continue embroidering the pattern, making it very difficult to deal with the thread after the pattern is finished. Trim the thread at the beginning.

166