Brother NV1200 Saving stitch settings, † Example Bus, Default stitch length is 2.5 mm

————————————————————————————————————————————————————

†Example: Bus

Saving stitch settings

This machine is preset with the default settings for the stitch width (zigzag width), stitch length, thread tension, programmed thread cutting, and automatic reverse/reinforcement stitching for each stitch. However, if you wish to save specific settings for a

stitch so that they can be used later, press after changing the settings to save the new settings with the selected stitch.

This feature can be used only with utility stitches.

† To use a stitch length of 2.0 mm for the

straight stitch
aSelect a straight stitch.		3
bPress	.

Memo

z The default stitch length is 2.5 mm.

cSet the stitch length to 2.0 mm.

dPress .

• To reset the selected stitch pattern to its

default settings, press , and then press

.

X The confirmation message is displayed.

Selecting Stitching 77