GENERAL SAFETY PRECAUTIONS

Locking nut

A locking nut is used to secure some types of cutting attachment.

When fitting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. To remove it, undo the nut in the same direction as the cutting attachment rotates. (CAUTION! The nut has a left-hand thread.)

When loosening and tightening the saw blade nut, there is a risk of injury from the teeth of the saw blade. You should therefore always ensure that your hand is shielded by the blade guard when doing this. Always use a socket spanner with a shaft that is long enough to allow this. The arrow in the diagram shows the area where you should operate the socket spanner when loosening or tightening the nut.

The nylon lining inside the locking nut must not be so worn that you can turn it by hand. The lining should offer a resistance of at least 1.5 Nm. The nut should be replaced after it has been put on approx. 10 times.

Cutting equipment

This section describes how to choose and maintain your cutting equipment in order to:

Reduce the risk of blade thrust.

Obtain maximum cutting performance.

Extend the life of cutting equipment.

IMPORTANT!

Only use cutting attachments with the guards we recommend! See the chapter on Technical data.

Refer to the instructions for the cutting attachment to check the correct way to load the cord and the correct cord diameter.

WARNING! Always stop the engine before

!doing any work on the cutting attachment. This continues to rotate even after the throttle has been released. Ensure that the cutting attachment has stopped completely and disconnect the HT lead from the spark plug before you start to work on it.

WARNING! A faulty cutting attachment may

!increase the risk of accidents.

Trimmer head

IMPORTANT!

Always ensure the trimmer cord is wound tightly and evenly around the drum, otherwise the machine will generate harmful vibration.

Only use the recommended trimmer heads and trimmer cords. These have been tested by the manufacturer to suit a particular engine size. This is especially important when a fully automatic trimmer head is used. Only use the recommended cutting attachment. See the chapter on Technical data.

Smaller machines generally require small trimmer heads and vice versa. This is because when clearing using a cord the engine must throw out the cord radially from the trimmer head and overcome the resistance of the grass being cleared.

The length of the cord is also important. A longer cord requires greater engine power than a shorter cord of the same diameter.

Make sure that the cutter on the trimmer guard is intact. This is used to cut the cord to the correct length.

To increase the life of the cord it can be soaked in water for a couple of days. This will make the line tougher so that it lasts longer.

English – 9

Page 9
Image 9
Husqvarna 324L, 324LD manual Cutting equipment, Locking nut, Trimmer head

324L, 324LD specifications

The Husqvarna 324L and 324LD are versatile and powerful trimmers designed for both professional landscapers and gardening enthusiasts. With their advanced features and technologies, they stand out as reliable tools for maintaining lawn aesthetics and tackling tough vegetation.

One of the primary characteristics of these models is their cutting efficiency. Both the 324L and 324LD are equipped with a robust 25.4cc two-stroke engine that provides a strong power-to-weight ratio, allowing users to tackle various tasks with ease. The engines in these trimmers are designed for performance and deliver a consistent cutting speed, making them suitable for everything from refined garden edges to clearing dense brush.

In terms of ergonomics, Husqvarna prioritizes user comfort and control. The 324L and 324LD come with an adjustable handle that can be easily manipulated to fit the user's height and preference, leading to extended usage without fatigue. The lightweight design further enhances maneuverability, allowing users to navigate around obstacles and reach difficult areas without straining.

Another notable feature is the excellent cutting system. Both models include a Tap ‘n Go spool, which allows users to easily extend the trimmer line by tapping the head on the ground. This convenient feature ensures continuous performance without needing to stop and manually adjust the line. Additionally, the dual line cutting system provides an optimized cutting area, resulting in faster work completion.

Husqvarna has integrated several cutting-edge technologies into these models for increased efficiency and ease of maintenance. The air purge system removes air from the carburetor and fuel system, facilitating smooth starting. The Smart Start technology reduces the resistance in the starter cord by up to 40%, making it easier to start the engine even in challenging conditions.

Both trimmers are also designed with durability in mind. The reinforced materials used in construction resist wear and tear, ensuring longevity in tough environments. The design further promotes effective cooling to enhance engine performance and prolong service life.

In summary, the Husqvarna 324L and 324LD are well-equipped trimmers that combine performance, comfort, and innovative technology. With their robust engines, ergonomic design, advanced cutting systems, and durable construction, they are ideal choices for anyone seeking reliable tools for lawn care and landscaping maintenance. Whether for professional use or personal projects, these trimmers deliver quality results with every operation.