Husqvarna 324LD manual Maintenance schedule, Bevel gear, Daily maintenance, Weekly maintenance

MAINTENANCE

Bevel gear

The bevel gear is filled with the right quantity of grease at the factory. However, before using the machine you should check that the bevel gear is filled three-quarters full with grease. Use HUSQVARNA special grease.

The grease in the bevel gear does not normally need to be changed except if repairs are carried out.

CAUTION! Use only HUSQVARNA replacement parts. Use of other brands of replacement parts can cause damage to your unit or injury to the operator or others. Your warranty does not cover damage or liability caused by the use of accessories and/or attachments not specifically recommended by HUSQVARNA.

Maintenance schedule

Below you will find some general maintenance instructions.

Daily maintenance

•Check the engine oil level and top up if necessary.

•Check throttle trigger and throttle trigger lockout function.

•Check that the stop switch works correctly.

•Check that there are no fuel leaks from the engine, tank or fuel lines.

•Check that the cutter does not rotate when the engine is idling.

•Clean the outside of the machine.

•Check that the harness is not damaged.

•Check that the blade guard is not damaged or cracked. Replace the blade guard if it is exposed to impact or is cracked.

•A non-balanced blade/trimmer head induces heavy vibrations that may damage the machine.

•Check that nuts and screws are tight.

•Check that the screws that hold the bevel gear are tight.

Weekly maintenance

•Check the starter and starter cord.

•Clean the carburettor area.

•Clean the outside of the spark plug. Remove it and check the electrode gap. Adjust the gap to 0,6-0,7 mm, or replace the spark plug. Check that the spark plug is fitted with a suppressor.

•Clean the cooling fins on the cylinder and check that the air intake near the starter is not blocked.

•Check that the bevel gear is filled with grease up to 3/4. Use special grease.

•Clean the air filter.

Monthly maintenance

•Clean the fuel tank.

•Clean the outside of the carburettor and the space around it.

•Check fuel hose for cracks or other damage. Change if necessary.

•Change the fuel filter in fuel tank.

•Check electrical wires and connections.

•Replace the spark plug. Check that the spark plug is fitted with a suppressor.

•Change the air filter.

•Check and clean the spark arrestor mesh on the muffler.

•Change the engine oil.

English – 19