TECHNICAL DATA
Technical data
| 324Lx | 324LDx |
Engine |
|
|
Cylinder displacement, cu.in/cm3 | 1,53/25,0 | 1,53/25,0 |
Cylinder bore, inch/mm | 1,38/35 | 1,38/35 |
Stroke, inch/mm | 1,03/26 | 1,03/26 |
Idle speed, rpm | 3100 | 3100 |
Recommended max. fast idle speed, rpm | 11000 | 11000 |
Speed of output shaft, rpm | 8300 | 8300 |
Max. engine output, acc. to ISO 8893, kW/ rpm | 0,8 / 7000 | 0,8 / 7000 |
Catalytic converter muffler | No | No |
No | No | |
Ignition system |
|
|
Manufacturer/type of ignition system | Ikeda | Ikeda |
Spark plug | NGK CMR5H | NGK CMR5H |
Electrode gap, inch/mm | 0,024/0,6 | 0,024/0,6 |
Fuel and lubrication system |
|
|
Manufacturer/type of carburetor | Walbro | Walbro |
Fuel tank capacity, US pint/litre | 1,06/0,5 | 1,06/0,5 |
Weight |
|
|
Weight without fuel, cutting attachment and guard, Lbs/kg
Sound levels
(see note 1)
Equivalent sound pressure level at the user′s ear, measured according to ANSI
Vibration levels
11,2/5,1
90/97
11,9/5,4
90/97
Vibration levels at handles, measured according to ANSI |
|
|
At idle, left/right handles, min.: | 1,9/1,8 | 1,7/1,6 |
At idle, left/right handles, max.: | 2,2/1,9 | 2,2/1,7 |
At max. speed, left/right handles, min.: | 5,8/5,5 | 3,2/4,5 |
At max. speed, left/right handles, max.: | 6,1/5,7 | 5,4/5,6 |
Note 1: Equivalent noise pressure level is calculated as the
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.
20 – English