MAINTENANCE

Sharpening the clearing blade

!WARNING!

Incorrect cutting equipment or an incorrectly sharpened blade increases the risk of kickback.

•See the cutting

equipment’s packaging for correct filing instructions.

•A correctly sharpened blade is a prerequisite for working efficiently and to avoid unnecessary wear to the blade and clearing saw.

•Make sure that the blade is well supported when you use the file. Use a 5.5

mm round file with a file holder.

• The sharpening angle is 15°. Every other tooth is sharpened to the right and the intermediate tooth to the left. When the blade has been heavily pitted by stones the upper side of the teeth can, in exceptional cases, need to be dressed using a flat file. In such cases this takes place before sharpening with the round file. Dressing the top side must be carried out equally for all teeth.

•Adjust the setting. This should be 1 mm.

NOTE: Use only HUSQVARNA replacement parts. Use of other brands of replacement parts can cause damage to your unit or injury to the operator or others. Your warranty does not cover damage or liability caused by the use of accessories and/or attachments not specifically recommended by

HUSQVARNA.

Maintenance schedule

Below you will find some general maintenance instructions.

Daily maintenance

•Check throttle trigger and throttle trigger lockout function.

•Check stop switch function.

•Check that blade/trimmer head does not rotate at idling.

•Clean the exterior of the machine.

•Check that the harness is undamaged.

•Check the blade guard for damage or cracks.

•Change the guard in case of impacts or cracks.

•Check that the blade is properly centred, sharp, and without cracks.

•Check the trimmer head for cracks and chips or damage. Replace if necessary.

•A non-balanced blade/trimmer head induces heavy vibrations that may damage the machine.

•Check that the blade nut is sufficiently tightened.

•Make sure that the blade transport guard is undamaged and that it can be securely fitted.

•Check that nuts and screws are sufficiently tightened.

Weekly maintenance

•Check the starter, especially cord and return spring.

•Clean the carburetor area.

•Clean the exterior of the spark plug.

•Remove it and check the electrode gap.

•Adjust it to 0,5 mm (.020"), or change the spark plug.

•Clean the cooling fins on the cylinder and check that the air intake at the starter is not clogged.

•Check that the angle gear is filled with grease up to 3/4. Use special grease.

•Clean the air filter.

•Clean or replace the muffler’s spark arrest screen (not on mufflers with a catalytic converter).

Monthly maintenance

•Clean the fuel tank.

•Clean the exterior of the carburetor and the space around it.

•Clean the fan and the space around it.

•Check fuel hose for cracks or other damage. Change if necessary.

•Change fuel filter in fuel tank.

•Check clutch, clutch spring and clutch drum for wear. Change if necessary.

•Check electrical wires and connections.

•Change the spark plug.

•Change the airfilter.

•Check and clean the muffler’s spark arrest screen if necessary (only mufflers with a catalytic converter).

28 – English

Page 27 Page 29
Page 28
Image 28
Husqvarna 325R, 323R manual Sharpening the clearing blade, Maintenance schedule, Daily maintenance, Weekly maintenance
Page 27 Page 29

325R, 323R specifications

The Husqvarna 325R and 323R are both impressive trimmers designed for users who demand power, efficiency, and durability in their landscaping equipment. These models showcase Husqvarna's commitment to quality and innovation, making them ideal for both professionals and avid gardeners.

The Husqvarna 325R features a robust 25.4cc X-Torq engine. This engine technology is designed to reduce fuel consumption and emissions, thus promoting eco-friendly gardening. The unit boasts a high power-to-weight ratio, meaning that users can handle heavier workloads without feeling fatigued. The 325R is equipped with a professional-grade gear head that enhances durability while ensuring optimal cutting performance. The trimmer shaft is straight and designed for efficient trimming in hard-to-reach areas.

On the other hand, the Husqvarna 323R also packs a powerful 25cc engine, offering a similar emphasis on reduced emissions and low fuel consumption. With its lightweight design, the 323R provides excellent maneuverability, making it suitable for residential applications as well as light professional work. This model is equipped with an efficient cutting head that utilizes a dual line system for quicker and more effective trimming.

Both models incorporate Smart Start technology, which significantly reduces the effort needed for starting the engine. This feature minimizes resistance in the starter cord, allowing users to get to work quickly. The trimmers also come with an adjustable handle, giving operators the flexibility to achieve the most comfortable grip and stance, resulting in improved control and reduced fatigue during extended use.

Additionally, both the 325R and 323R models are fitted with an anti-vibration system, enhancing comfort for longer sessions. This technology absorbs vibrations, providing a smoother operational experience. The trimmers' fuel tank is designed for extended operation, allowing users to work longer without frequent refueling.

In summary, the Husqvarna 325R and 323R stand out as reliable landscaping tools that cater to a variety of trimming tasks. Both models feature powerful engines, user-friendly technologies, and ergonomic designs that enhance comfort and efficiency. Whether you are a professional landscaper or a dedicated gardener, these trimmers are built to deliver superior performance while prioritizing user satisfaction and environmental responsibility.
Top Page Image Contents