ASSEMBLY
•Insert a finger into the centre hole of the cover (I) while grasping the cover with your other fingers. Using the index finger and thumb of your other hand, release the two catches (J) that engage in the
(K). Pull apart the trimmer head, grasping the cover firmly.
•Place the cover (I) and the support flange (F) on the output shaft.
•Fit the nut (G). The nut must be tightened to a torque of
•Fit the bottom half of the trimmer head (K) to the cover (I) by pressing them together, with the
•To dismantle, follow the instructions in the reverse order.
Fitting the blade guard/combination guard, grass blade and grass cutter
•Hook the blade guard/combination guard (A) onto the fitting on the shaft and secure with the bolt. CAUTION! Use the recommended blade guard. See the Technical data section.
G
F
E
D 
A | B |
|
C
•Fit the drive disc (B) on the output shaft.
•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.
•Insert the locking pin (C) in the hole to lock the shaft.
•Place the blade (D), support cup (E) and support flange
(F) on the output shaft.
•Fit the nut (G). The nut must be tightened to a torque of
Fitting other guards and cutting attachments
•Fit the correct trimmer guard (A) for use with the trimmer head. Hook the trimmer guard/combination guard onto the fitting on the shaft and secure with the bolt (L).
•Fit the drive disc (B) on the output shaft.
•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.
•Insert the locking pin (C) in the hole to lock the shaft.
•Screw on the trimmer head/plastic blades (H) in the opposite direction to the direction of rotation.
H
H
•To dismantle, follow the instructions in the reverse order.
12 – English |
