GENERAL SAFETY PRECAUTIONS

Never use a machine that has a faulty muffler.

Regularly check that the muffler is securely attached to the machine.

If the muffler on your machine is fitted with a spark arrestor mesh this must be cleaned regularly. A blocked mesh will cause the engine to overheat and may lead to serious damage.

WARNING! Mufflers fitted with catalytic

! converters get very hot during use and remain so for some time after stopping. This also applies at idle speed. Contact can result in burns to the skin.

Remember the risk of fire!

WARNING! The inside of the muffler

! contain chemicals that may be carcinogenic. Avoid contact with these elements in the event of a damaged muffler.

WARNING! Bear in mind that:

! The exhaust fumes from the engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!

Cutting equipment

This section describes how to choose and maintain your cutting equipment in order to:

•Reduce the risk of blade thrust.

•Obtain maximum cutting performance.

•Extend the life of cutting equipment.

IMPORTANT!

Only use cutting attachments with the guards we recommend! See the chapter on Technical data.

Refer to the instructions for the cutting attachment to check the correct way to load the cord and the correct cord diameter.

WARNING! Always stop the engine

! before doing any work on the cutting attachment.This continues to rotate even after the throttle has been released. Ensure that the cutting attachment has stopped completely and disconnect the HT lead from the spark plug before you start to work on it.

!

WARNING! A faulty cutting attachment

may increase the risk of accidents.

 

Trimmer head

IMPORTANT!

Always ensure the trimmer cord is wound tightly and evenly around the drum, otherwise the machine will generate harmful vibration.

•Only use the recommended trimmer heads and trimmer cords. These have been tested by the manufacturer to suit a particular engine size. This is especially important when a fully automatic trimmer head is used. Only use the recommended cutting attachment. See the chapter on Technical data.

•Smaller machines generally require small trimmer heads and vice versa. This is because when clearing using a cord the engine must throw out the cord radially from the trimmer head and overcome the resistance of the grass being cleared.

•The length of the cord is also important. A longer cord requires greater engine power than a shorter cord of the same diameter.

•Make sure that the cutter on the trimmer guard is intact. This is used to cut the cord to the correct length.

•To increase the life of the cord it can be soaked in water for a couple of days. This will make the line tougher so that it lasts longer.

English – 9

Page 8 Page 10
Page 9
Image 9
Husqvarna 327LDX-series manual Cutting equipment, Trimmer head
Page 8 Page 10

327LDX-series specifications

The Husqvarna 327LDX-series is a remarkable line of versatile, powerful trimmers designed for both professional landscapers and passionate homeowners. Known for their durability and performance, these trimmers boast features that make them ideal for tackling various outdoor tasks, from trimming grass to maintaining garden edges.

A standout characteristic of the 327LDX series is its lightweight design. Weighing in at just a few kilograms, the trimmers are easy to maneuver, reducing fatigue during extended use. This ergonomic design is complemented by an adjustable handle, allowing users to customize their grip for maximum comfort. Additionally, the split shaft design enables seamless attachment swapping, making it convenient to switch between different tools, such as brush cutters or pole saws.

One of the most impressive aspects of the 327LDX series is its powerful engine. Equipped with a reliable X-Torq engine, these trimmers provide excellent fuel efficiency while significantly reducing harmful emissions. The engine’s design ensures a high torque at lower RPMs, which enhances performance and prolongs the lifespan of the machine. Whether handling thick grass or tough weeds, the 327LDX series delivers consistent power, allowing users to finish jobs efficiently.

The trimmer heads in the 327LDX series are designed for ease of use and efficiency. With the easy-to-load trimmer head, users can quickly and effectively re-string the unit, minimizing downtime. The Auto Return Stop Switch also adds convenience, as it automatically resets to the ON position, making it easy to start the machine again after use.

Furthermore, the Husqvarna 327LDX series is designed with innovative technologies to enhance user experience. The LowVib system helps reduce vibrations during operation, providing a smoother experience and minimizing strain on the hands and arms. This feature is particularly beneficial for professionals who spend long hours trimming and maintaining landscapes.

In summary, the Husqvarna 327LDX-series stands out in the realm of outdoor power equipment. With its lightweight, ergonomic design, powerful X-Torq engine, and user-friendly features, it provides an exceptional balance of performance and comfort. Whether you're a professional landscaper or a homeowner seeking to maintain a pristine garden, the 327LDX series is an excellent choice that promises reliability and effectiveness in every task.
Top Page Image Contents