Prestige 2602HWL-D3A Support Notes
Relay to PSTN
The Relay to PSTN field can be found under PSTN configuration WEB GUI in Relay to PSTN section. This field is used to specify phone numbers to which the Prestige will always send calls through the regular PSTN phone service without pushing prefix. In other words, numbers which specify on this field do not need to dial prefix number to be dialed out. However, these numbers must be for phones on the PSTN (not VOIP phones) and currently, P2602HWL
After configuring the PSTN setup, click “Apply” to save changes back to P2602HWL – D3A.
Note: It is recommended to configure your local emergency services such as Police Dept, Fire Dept, Emergency Medical services phone number in this field. Thus in any cases, these unit can be reach in case of emergency by dialing their number without prefix, regardless if there are power loss.
How to connect Lifeline and DSL connection
To use both VOIP and regular phone service with
Making the correct connection it allows you to still receive phone calls while someone else is making outgoing VoIP call though Prestige’s 2 pots port, the following figure shows you how to connect your phone and DSL service.
If your ADSL line type is Splitter type you ISP will provide you with splitter otherwise it should be splitterless. For correct info you may check with your service provider as for which type of line you have.
Firgure 1 Splitter type
126
All contents copyright (c) 2007 ZyXEL Communications Corporation.
