ZyXEL Communications 2602HWL-D3A manual Ethernet connection, TCP/IP Installation

Prestige 2602HWL-D3A Support Notes

∙Before you begin

The Prestige is shipped with the following factory default:

1.IP address = 192.168.1.1, subnet mask = 255.255.255.0 (24 bits)

2.DHCP server enabled with IP pool starting from 192.168.1.33

3.Default SMT menu password = 1234

∙Setting up the PC (Windows OS)

1.Ethernet connection

All PCs must have an Ethernet adapter card installed.

∙If you only have one PC, connect the PC's Ethernet adapter to the Prestige's LAN port with a crossover (red one) Ethernet cable.

∙If you have more than one PC, both the PC's Ethernet adapters and the Prestige's LAN port must be connected to an external hub with straight Ethernet cable.

2.TCP/IP Installation

You must first install TCP/IP software on each PC before you can use it for Internet access. If you have already installed TCP/IP, go to the next section to configure it; otherwise, follow these steps to install:

∙In the Control Panel/Network window, click Add button.

∙In the Select Network Component Type windows, select Protocol and click Add.

9

All contents copyright (c) 2007 ZyXEL Communications Corporation.