ZyXEL Communications 2602HWL-D3A manual Key Settings Option Descriptions, Filter Action

Prestige 2602HWL-D3A Support Notes

not knowing what your MAC address is, please enter a command "ipconfig /all" after DOS prompt to get the MAC (physical) address of your wireless client.

If you use SMT management, the MAC Address Filter configuration are as shown below.

Enter the MAC Addresses of wireless cards in the filter set to allow or deny association from these cards.

Menu 3.5.1 - WLAN MAC Address Filter

Active= Yes

Filter Action= Allowed Association

------------------------------------------------------------------------------

1=	11:11:11:11:11:11	13=	00:00:00:00:00:00	25=	00:00:00:00:00:00
2=	00:00:00:00:00:00	14=	00:00:00:00:00:00	26=	00:00:00:00:00:00
3=	00:00:00:00:00:00	15=	00:00:00:00:00:00	27=	00:00:00:00:00:00
4=	00:00:00:00:00:00	16=	00:00:00:00:00:00	28=	00:00:00:00:00:00
5=	00:00:00:00:00:00	17=	00:00:00:00:00:00	29=	00:00:00:00:00:00
6=	00:00:00:00:00:00	18=	00:00:00:00:00:00	30=	00:00:00:00:00:00
7=	00:00:00:00:00:00	19=	00:00:00:00:00:00	31=	00:00:00:00:00:00
8=	00:00:00:00:00:00	20=	00:00:00:00:00:00	32=	00:00:00:00:00:00
9=	00:00:00:00:00:00	21=	00:00:00:00:00:00
10=	00:00:00:00:00:00	22=	00:00:00:00:00:00
11=	00:00:00:00:00:00	23=	00:00:00:00:00:00
12=	00:00:00:00:00:00	24=	00:00:00:00:00:00

------------------------------------------------------------------------------

Enter here to CONFIRM or ESC to CANCEL:

Key Settings:

Option	Descriptions
	Allow or block association from MAC addresses contained in this list. If Allow Association
Filter Action	is selected in this field, hosts with MAC addresses configured in this list will be allowed to
	associate with AP. If Deny Association is selected in this field, hosts with MAC addresses
	configured in this list will be blocked.
	99
	All contents copyright (c) 2007 ZyXEL Communications Corporation.